Evkachev_TestManipulate_PM04/packages/ClosedXML.Parser.2.0.0/lib/netstandard2.0/ClosedXML.Parser.xml

<?xml version="1.0"?>
<doc>
    <assembly>
        <name>ClosedXML.Parser</name>
    </assembly>
    <members>
        <member name="T:ClosedXML.Parser.BinaryOperation">
            <summary>
            Binary operations that can occur in the formula.
            </summary>
        </member>
        <member name="F:ClosedXML.Parser.BinaryOperation.Concat">
            <summary><c>&amp;</c></summary>
        </member>
        <member name="F:ClosedXML.Parser.BinaryOperation.Addition">
            <summary><c>+</c></summary>
        </member>
        <member name="F:ClosedXML.Parser.BinaryOperation.Subtraction">
            <summary><c>-</c></summary>
        </member>
        <member name="F:ClosedXML.Parser.BinaryOperation.Multiplication">
            <summary><c>*</c></summary>
        </member>
        <member name="F:ClosedXML.Parser.BinaryOperation.Division">
            <summary><c>/</c></summary>
        </member>
        <member name="F:ClosedXML.Parser.BinaryOperation.Power">
            <summary><c>^</c></summary>
        </member>
        <member name="F:ClosedXML.Parser.BinaryOperation.GreaterOrEqualThan">
            <summary><c>&gt;=</c></summary>
        </member>
        <member name="F:ClosedXML.Parser.BinaryOperation.LessOrEqualThan">
            <summary><c>&lt;=</c></summary>
        </member>
        <member name="F:ClosedXML.Parser.BinaryOperation.LessThan">
            <summary><c>&lt;</c></summary>
        </member>
        <member name="F:ClosedXML.Parser.BinaryOperation.GreaterThan">
            <summary><c>&gt;</c></summary>
        </member>
        <member name="F:ClosedXML.Parser.BinaryOperation.NotEqual">
            <summary><c>!=</c></summary>
        </member>
        <member name="F:ClosedXML.Parser.BinaryOperation.Equal">
            <summary><c>=</c></summary>
        </member>
        <member name="F:ClosedXML.Parser.BinaryOperation.Union">
            <summary><c>,</c></summary>
        </member>
        <member name="F:ClosedXML.Parser.BinaryOperation.Intersection">
            <summary><c>SPACE</c></summary>
        </member>
        <member name="F:ClosedXML.Parser.BinaryOperation.Range">
            <summary><c>:</c></summary>
        </member>
        <member name="T:ClosedXML.Parser.CopyVisitor">
            <summary>
            A visitor that generates the identical formula for the parsed formula based on passed arguments.
            CopyVisitor doesn't make any judgements if passed arguments have been modified. It just makes
            a newly allocated copy based on passed values.
            </summary>
        </member>
        <member name="M:ClosedXML.Parser.CopyVisitor.LogicalValue(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,System.Boolean)">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.CopyVisitor.NumberValue(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,System.Double)">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.CopyVisitor.TextValue(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,System.String)">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.CopyVisitor.ErrorValue(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,System.ReadOnlySpan{System.Char})">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.CopyVisitor.ArrayNode(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,System.Int32,System.Int32,System.Collections.Generic.IReadOnlyList{ClosedXML.Parser.TransformedSymbol})">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.CopyVisitor.BlankNode(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange)">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.CopyVisitor.LogicalNode(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,System.Boolean)">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.CopyVisitor.ErrorNode(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,System.ReadOnlySpan{System.Char})">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.CopyVisitor.NumberNode(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,System.Double)">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.CopyVisitor.TextNode(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,System.String)">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.CopyVisitor.Reference(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,ClosedXML.Parser.ReferenceArea)">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.CopyVisitor.SheetReference(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,System.String,ClosedXML.Parser.ReferenceArea)">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.CopyVisitor.BangReference(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,ClosedXML.Parser.ReferenceArea)">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.CopyVisitor.Reference3D(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,System.String,System.String,ClosedXML.Parser.ReferenceArea)">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.CopyVisitor.ExternalSheetReference(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,System.Int32,System.String,ClosedXML.Parser.ReferenceArea)">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.CopyVisitor.ExternalReference3D(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,System.Int32,System.String,System.String,ClosedXML.Parser.ReferenceArea)">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.CopyVisitor.Function(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,System.ReadOnlySpan{System.Char},System.Collections.Generic.IReadOnlyList{ClosedXML.Parser.TransformedSymbol})">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.CopyVisitor.ExternalFunction(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,System.Int32,System.ReadOnlySpan{System.Char},System.Collections.Generic.IReadOnlyList{ClosedXML.Parser.TransformedSymbol})">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.CopyVisitor.Function(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,System.String,System.ReadOnlySpan{System.Char},System.Collections.Generic.IReadOnlyList{ClosedXML.Parser.TransformedSymbol})">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.CopyVisitor.ExternalFunction(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,System.Int32,System.String,System.ReadOnlySpan{System.Char},System.Collections.Generic.IReadOnlyList{ClosedXML.Parser.TransformedSymbol})">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.CopyVisitor.CellFunction(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,ClosedXML.Parser.RowCol,System.Collections.Generic.IReadOnlyList{ClosedXML.Parser.TransformedSymbol})">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.CopyVisitor.StructureReference(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,ClosedXML.Parser.StructuredReferenceArea,System.String,System.String)">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.CopyVisitor.StructureReference(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,System.String,ClosedXML.Parser.StructuredReferenceArea,System.String,System.String)">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.CopyVisitor.ExternalStructureReference(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,System.Int32,System.String,ClosedXML.Parser.StructuredReferenceArea,System.String,System.String)">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.CopyVisitor.Name(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,System.String)">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.CopyVisitor.SheetName(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,System.String,System.String)">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.CopyVisitor.BangName(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,System.String)">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.CopyVisitor.ExternalName(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,System.Int32,System.String)">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.CopyVisitor.ExternalSheetName(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,System.Int32,System.String,System.String)">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.CopyVisitor.BinaryNode(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,ClosedXML.Parser.BinaryOperation,ClosedXML.Parser.TransformedSymbol,ClosedXML.Parser.TransformedSymbol)">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.CopyVisitor.Unary(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,ClosedXML.Parser.UnaryOperation,ClosedXML.Parser.TransformedSymbol)">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.CopyVisitor.Nested(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,ClosedXML.Parser.TransformedSymbol)">
            <inheritdoc />
        </member>
        <member name="T:ClosedXML.Parser.FormulaConverter">
            <summary>
            Convert between <em>A1</em> and <em>R1C1</em> style formulas.
            </summary>
        </member>
        <member name="M:ClosedXML.Parser.FormulaConverter.ToR1C1(System.String,System.Int32,System.Int32)">
            <summary>
            Convert a formula in <em>A1</em> form to the <em>R1C1</em> form.
            </summary>
            <param name="formulaA1">Formula text.</param>
            <param name="row">The row origin of R1C1, from 1 to 1048576.</param>
            <param name="col">The column origin of R1C1, from 1 to 16384.</param>
            <returns>Formula converted to R1C1.</returns>
            <exception cref="T:ClosedXML.Parser.ParsingException">The formula is not parseable.</exception>
        </member>
        <member name="M:ClosedXML.Parser.FormulaConverter.ToA1(System.String,System.Int32,System.Int32)">
            <summary>
            Convert a formula in <em>R1C1</em> form to the <em>A1</em> form.
            </summary>
            <param name="formulaR1C1">Formula text in R1C1.</param>
            <param name="row">The row origin of R1C1, from 1 to 1048576.</param>
            <param name="col">The column origin of R1C1, from 1 to 16384.</param>
            <returns>Formula converted to A1.</returns>
            <exception cref="T:ClosedXML.Parser.ParsingException">The formula is not parseable.</exception>
        </member>
        <member name="M:ClosedXML.Parser.FormulaConverter.ModifyA1(System.String,System.Int32,System.Int32,ClosedXML.Parser.IAstFactory{ClosedXML.Parser.TransformedSymbol,ClosedXML.Parser.TransformedSymbol,ClosedXML.Parser.ModContext})">
            <summary>
            Modify the formula using the passed <paramref name="factory"/>.
            </summary>
            <param name="formulaA1">Original formula in A1 style.</param>
            <param name="row">Row number of formula.</param>
            <param name="col">Column number of formula.</param>
            <param name="factory">Visitor to transform the formula.</param>
        </member>
        <member name="M:ClosedXML.Parser.FormulaConverter.ModifyA1(System.String,System.String,System.Int32,System.Int32,ClosedXML.Parser.IAstFactory{ClosedXML.Parser.TransformedSymbol,ClosedXML.Parser.TransformedSymbol,ClosedXML.Parser.ModContext})">
            <summary>
            Modify the formula using the passed <paramref name="factory"/>.
            </summary>
            <param name="formulaA1">Original formula in A1 style.</param>
            <param name="sheet">Name of the sheet where is the formula.</param>
            <param name="row">Row number of formula.</param>
            <param name="col">Column number of formula.</param>
            <param name="factory">Visitor to transform the formula.</param>
        </member>
        <member name="T:ClosedXML.Parser.FormulaParser`3">
            <summary>
            A parser of Excel formulas, with main purpose of creating an abstract syntax tree.
            </summary>
            <remarks>
            An implementation is a recursive descent parser, based on the ANTLR grammar.
            </remarks>
            <typeparam name="TScalarValue">Type of a scalar value used across expressions.</typeparam>
            <typeparam name="TNode">Type of a node used in the AST.</typeparam>
            <typeparam name="TContext">A context of the parsing. It's passed to every factory method and can contain global info that doesn't belong individual nodes.</typeparam>
        </member>
        <member name="F:ClosedXML.Parser.FormulaParser`3._a1Mode">
            <summary>
            Is parser in A1 mode (true) or R1C1 mode (false)?
            </summary>
        </member>
        <member name="M:ClosedXML.Parser.FormulaParser`3.CellFormulaA1(System.String,`2,ClosedXML.Parser.IAstFactory{`0,`1,`2})">
            <summary>
            Parse a formula using A1 semantic for references. 
            </summary>
            <param name="formula">Formula text that will be parsed.</param>
            <param name="context">Context that is going to be passed to every method of the <paramref name="factory"/>.</param>
            <param name="factory">Factory to create nodes of AST tree.</param>
            <exception cref="T:ClosedXML.Parser.ParsingException">If the formula doesn't satisfy the grammar.</exception>
        </member>
        <member name="M:ClosedXML.Parser.FormulaParser`3.CellFormulaR1C1(System.String,`2,ClosedXML.Parser.IAstFactory{`0,`1,`2})">
            <summary>
            Parse a formula using R1C1 semantic for references. 
            </summary>
            <param name="formula">Formula text that will be parsed.</param>
            <param name="context">Context that is going to be passed to every method of the <paramref name="factory"/>.</param>
            <param name="factory">Factory to create nodes of AST tree.</param>
            <exception cref="T:ClosedXML.Parser.ParsingException">If the formula doesn't satisfy the grammar.</exception>
        </member>
        <member name="M:ClosedXML.Parser.FormulaParser`3.PrefixAtomExpression(System.Boolean,System.Boolean@)">
            <summary>
            Parser for two rules unified into a single method.
            <para>
            <c>
            prefix_atom_expression
                : (PLUS | MINUS) prefix_atom_expression
                | atom_expression
                ;
            </c>
            
            <c>
            arg_prefix_atom_expression
                : (PLUS | MINUS) arg_prefix_atom_expression
                | arg_atom_expression
                ;     
            </c>
            </para>
            </summary>
            <param name="skipRangeUnion">Does the method represent <c>prefix_atom_expression</c> (<c>false</c>) or <c>arg_prefix_atom_expression</c> (<c>true</c>)</param>
            <param name="isPureRef">Is the expression of the node a reference expression?</param>
            <returns></returns>
        </member>
        <member name="M:ClosedXML.Parser.FormulaParser`3.RefImplicitExpression(System.Boolean,`1)">
            <summary>
            <code>
            ref_implicit_expression
                   : INTERSECT ref_implicit_expression
                   | ref_intersection_expression
                   ;
            </code>
            </summary>
        </member>
        <member name="M:ClosedXML.Parser.FormulaParser`3.RefSpillExpression(System.Boolean,`1)">
            <summary>
            Parser of the following node.
            <c>
            ref_spill_expression
                : ref_atom_expression SPILL?
                ;
            </c>
            </summary>
        </member>
        <member name="M:ClosedXML.Parser.FormulaParser`3.A1Reference">
            <summary>
            <code>
            a1_reference
                : A1_CELL
                | A1_CELL COLON A1_CELL
                | A1_SPAN_REFERENCE
                ;
            </code>
            </summary>
        </member>
        <member name="T:ClosedXML.Parser.IAstFactory`3">
            <summary>
            A factory used to create an AST through <see cref="T:ClosedXML.Parser.FormulaParser`3"/>.
            </summary>
            <remarks>
            Sheet names are in most cases strings, while most other texts are <c>ReadOnlySpan&lt;char&gt;</c>.
            The reason is that sheet name is always used as-is and in some methods is null, while
            other parameters might be processed. E.g. errors are likely to be transformed to enum, function name
            might need conversion from text <c>IFS</c> to <c>_xlfn.IFS</c> and so on.
            </remarks>
            <typeparam name="TScalarValue">Type of a scalar value used across expressions.</typeparam>
            <typeparam name="TNode">Type of a node used in the AST.</typeparam>
            <typeparam name="TContext">A context of the parsing. It's passed to every factory method and can contain global info that doesn't belong individual nodes.</typeparam>
        </member>
        <member name="M:ClosedXML.Parser.IAstFactory`3.LogicalValue(`2,ClosedXML.Parser.SymbolRange,System.Boolean)">
            <summary>
            Create a logical value for an array item.
            </summary>
            <param name="context">User supplied context for parsing a tree that is an argument of a parsing method.</param>
            <param name="range">Symbol range of the logical token in the formula.</param>
            <param name="value">The logical value of an array.</param>
        </member>
        <member name="M:ClosedXML.Parser.IAstFactory`3.NumberValue(`2,ClosedXML.Parser.SymbolRange,System.Double)">
            <summary>
            Create a numerical value for an array item.
            </summary>
            <param name="context">User supplied context for parsing a tree that is an argument of a parsing method.</param>
            <param name="range">Symbol range of the number token in the formula.</param>
            <param name="value">The numeric value of an array. Never <c>NaN</c> or <c>Infinity</c>.</param>
        </member>
        <member name="M:ClosedXML.Parser.IAstFactory`3.TextValue(`2,ClosedXML.Parser.SymbolRange,System.String)">
            <summary>
            Create a text value for an array item.
            </summary>
            <param name="context">User supplied context for parsing a tree that is an argument of a parsing method.</param>
            <param name="range">Symbol range of the text token in the formula.</param>
            <param name="text">The text. The characters of text are already unescaped.</param>
        </member>
        <member name="M:ClosedXML.Parser.IAstFactory`3.ErrorValue(`2,ClosedXML.Parser.SymbolRange,System.ReadOnlySpan{System.Char})">
            <summary>
            Create an error for an array item.
            </summary>
            <param name="context">User supplied context for parsing a tree that is an argument of a parsing method.</param>
            <param name="range">Symbol range of the error token in the formula.</param>
            <param name="error">The error text, string with <c>#</c> until the end of an error. No whitespace, converted to upper case, no matter the input.</param>
        </member>
        <member name="M:ClosedXML.Parser.IAstFactory`3.ArrayNode(`2,ClosedXML.Parser.SymbolRange,System.Int32,System.Int32,System.Collections.Generic.IReadOnlyList{`0})">
            <summary>
            Create an array for scalar values.
            </summary>
            <param name="context">User supplied context for parsing a tree that is an argument of a parsing method.</param>
            <param name="range">Symbol range of the array symbol in the formula.</param>
            <param name="rows">Number of rows of an array. At least 1.</param>
            <param name="columns">Number of column of an array. At least 1.</param>
            <param name="elements">Elements of an array, row by row. The number of elements is <paramref name="rows"/>*<paramref name="columns"/>.</param>
        </member>
        <member name="M:ClosedXML.Parser.IAstFactory`3.BlankNode(`2,ClosedXML.Parser.SymbolRange)">
            <summary>
            Create a blank node. In most cases, a blank argument of a function, e.g. <c>IF(TRUE,,)</c>.
            </summary>
            <param name="context">User supplied context for parsing a tree that is an argument of a parsing method.</param>
            <param name="range">Range in a formula that contains the blank.</param>
        </member>
        <member name="M:ClosedXML.Parser.IAstFactory`3.LogicalNode(`2,ClosedXML.Parser.SymbolRange,System.Boolean)">
            <summary>
            Create a node with a logical value.
            </summary>
            <param name="context">User supplied context for parsing a tree that is an argument of a parsing method.</param>
            <param name="range">Range in a formula that contains the logical.</param>
            <param name="value">The logical value that will be represented by the node.</param>
        </member>
        <member name="M:ClosedXML.Parser.IAstFactory`3.ErrorNode(`2,ClosedXML.Parser.SymbolRange,System.ReadOnlySpan{System.Char})">
            <summary>
            Create a node with an error value.
            </summary>
            <remarks>
            Sheet related ref errors (e.g. <c>Sheet!REF!</c> or <c>#REF!$A$4</c>) are also use this node. In that case,
            the <paramref name="range"/> contains whole section used to create the error, but <paramref name="error"/>
            contains normalized <c>#REF!</c> error.
            </remarks>
            <param name="context">User supplied context for parsing a tree that is an argument of a parsing method.</param>
            <param name="range">Range in a formula that contains the error.</param>
            <param name="error">The error text, string with <c>#</c> until the end of an error. No whitespace. In upper case format.</param>
        </member>
        <member name="M:ClosedXML.Parser.IAstFactory`3.NumberNode(`2,ClosedXML.Parser.SymbolRange,System.Double)">
            <summary>
            Create a node with an error value.
            </summary>
            <param name="context">User supplied context for parsing a tree that is an argument of a parsing method.</param>
            <param name="range">Range in a formula that contains the number.</param>
            <param name="value">The numeric value of an array. Never <c>NaN</c> or <c>Infinity</c>.</param>
        </member>
        <member name="M:ClosedXML.Parser.IAstFactory`3.TextNode(`2,ClosedXML.Parser.SymbolRange,System.String)">
            <summary>
            Create a node with a text value.
            </summary>
            <param name="context">User supplied context for parsing a tree that is an argument of a parsing method.</param>
            <param name="range">Range in a formula that contains the text.</param>
            <param name="text">The text. The characters of text are already unescaped.</param>
        </member>
        <member name="M:ClosedXML.Parser.IAstFactory`3.Reference(`2,ClosedXML.Parser.SymbolRange,ClosedXML.Parser.ReferenceArea)">
            <summary>
            Create a node for a reference to cells without a worksheet.
            </summary>
            <param name="context">User supplied context for parsing a tree that is an argument of a parsing method.</param>
            <param name="range">Range in a formula that contains the reference.</param>
            <param name="reference">The referenced area.</param>
        </member>
        <member name="M:ClosedXML.Parser.IAstFactory`3.SheetReference(`2,ClosedXML.Parser.SymbolRange,System.String,ClosedXML.Parser.ReferenceArea)">
            <summary>
            Create a node for a reference in a specific sheet.
            </summary>
            <param name="context">User supplied context for parsing a tree that is an argument of a parsing method.</param>
            <param name="range">Range in a formula that contains the sheet reference.</param>
            <param name="sheet">Name of a sheet (unescaped) of the <paramref name="reference"/>.</param>
            <param name="reference">Area in the sheet.</param>
        </member>
        <member name="M:ClosedXML.Parser.IAstFactory`3.BangReference(`2,ClosedXML.Parser.SymbolRange,ClosedXML.Parser.ReferenceArea)">
            <summary>
            Create a node that processes a bang reference in a formula (e.g <c>"Branch:" &amp; !$C$5</c>). Bang reference should
            <list>
              <item>Be used only in defined names.</item>
              <item>Always be absolute (name doesn't have an anchor).</item>
            </list>
            </summary>
            <param name="context">User supplied context for parsing a tree that is an argument of a parsing method.</param>
            <param name="range">Range in a formula that contains the bang reference.</param>
            <param name="reference">Area in the sheet.</param>
        </member>
        <member name="M:ClosedXML.Parser.IAstFactory`3.Reference3D(`2,ClosedXML.Parser.SymbolRange,System.String,System.String,ClosedXML.Parser.ReferenceArea)">
            <summary>
            Create a node for a 3D reference.
            </summary>
            <param name="context">User supplied context for parsing a tree that is an argument of a parsing method.</param>
            <param name="range">Range in a formula that contains the 3D reference.</param>
            <param name="firstSheet">First sheet of 3D reference.</param>
            <param name="lastSheet">Last sheet of 3D reference.</param>
            <param name="reference">Area in all sheets of 3D reference.</param>
        </member>
        <member name="M:ClosedXML.Parser.IAstFactory`3.ExternalSheetReference(`2,ClosedXML.Parser.SymbolRange,System.Int32,System.String,ClosedXML.Parser.ReferenceArea)">
            <summary>
            Create a node for a reference to cells of a specific sheet in a different worksheet.
            </summary>
            <param name="context">User supplied context for parsing a tree that is an argument of a parsing method.</param>
            <param name="range">Range in a formula that contains the external sheet reference.</param>
            <param name="workbookIndex">Id of an external workbook. The actual path to the file is in workbook part, <c>externalReferences</c> tag.</param>
            <param name="sheet">Name of a sheet (unescaped) of the <paramref name="reference"/>.</param>
            <param name="reference">Area the external sheet.</param>
        </member>
        <member name="M:ClosedXML.Parser.IAstFactory`3.ExternalReference3D(`2,ClosedXML.Parser.SymbolRange,System.Int32,System.String,System.String,ClosedXML.Parser.ReferenceArea)">
            <summary>
            Create a node for a 3D reference in a different workbook.
            </summary>
            <param name="context">User supplied context for parsing a tree that is an argument of a parsing method.</param>
            <param name="range">Range in a formula that contains the external 3D reference.</param>
            <param name="workbookIndex">Id of an external workbook. The actual path to the file is in workbook part, <c>externalReferences</c> tag.</param>
            <param name="firstSheet">First sheet of 3D reference.</param>
            <param name="lastSheet">Last sheet of 3D reference.</param>
            <param name="reference">Area in all sheets of 3D reference.</param>
        </member>
        <member name="M:ClosedXML.Parser.IAstFactory`3.Function(`2,ClosedXML.Parser.SymbolRange,System.ReadOnlySpan{System.Char},System.Collections.Generic.IReadOnlyList{`1})">
            <summary>
            Create a node for a function.
            </summary>
            <param name="context">User supplied context for parsing a tree that is an argument of a parsing method.</param>
            <param name="range">Range in a formula that contains the function including arguments.</param>
            <param name="functionName">Name of a function.</param>
            <param name="arguments">Nodes of argument values.</param>
        </member>
        <member name="M:ClosedXML.Parser.IAstFactory`3.Function(`2,ClosedXML.Parser.SymbolRange,System.String,System.ReadOnlySpan{System.Char},System.Collections.Generic.IReadOnlyList{`1})">
            <summary>
            Create a node for a function on a sheet. Might happen for VBA.
            </summary>
            <param name="context">User supplied context for parsing a tree that is an argument of a parsing method.</param>
            <param name="range"></param>
            <param name="sheetName">Name of a sheet.</param>
            <param name="functionName">Name of a function.</param>
            <param name="args">Nodes of argument values.</param>
        </member>
        <member name="M:ClosedXML.Parser.IAstFactory`3.ExternalFunction(`2,ClosedXML.Parser.SymbolRange,System.Int32,System.String,System.ReadOnlySpan{System.Char},System.Collections.Generic.IReadOnlyList{`1})">
            <summary>
            Create a node for a sheet-scoped function from an external workbook.
            </summary>
            <param name="context">User supplied context for parsing a tree that is an argument of a parsing method.</param>
            <param name="range"></param>
            <param name="workbookIndex">Id of an external workbook. The actual path to the file is in workbook part, <c>externalReferences</c> tag.</param>
            <param name="sheetName">Name of a sheet in external workbook.</param>
            <param name="functionName">Name of the function.</param>
            <param name="arguments">Nodes of argument values.</param>
        </member>
        <member name="M:ClosedXML.Parser.IAstFactory`3.ExternalFunction(`2,ClosedXML.Parser.SymbolRange,System.Int32,System.ReadOnlySpan{System.Char},System.Collections.Generic.IReadOnlyList{`1})">
            <summary>
            Create a node for a function from an external workbook.
            </summary>
            <param name="context">User supplied context for parsing a tree that is an argument of a parsing method.</param>
            <param name="range">Range in a formula that contains the function including arguments.</param>
            <param name="workbookIndex">Id of an external workbook. The actual path to the file is in workbook part, <c>externalReferences</c> tag.</param>
            <param name="functionName">Name of the function.</param>
            <param name="arguments">Nodes of argument values.</param>
        </member>
        <member name="M:ClosedXML.Parser.IAstFactory`3.CellFunction(`2,ClosedXML.Parser.SymbolRange,ClosedXML.Parser.RowCol,System.Collections.Generic.IReadOnlyList{`1})">
            <summary>
            Create a cell function. It references another function that should likely contain a LAMBDA value.
            </summary>
            <remarks>Cell functions are not yet supported by Excel, but are part of a grammar.</remarks>
            <param name="context">User supplied context for parsing a tree that is an argument of a parsing method.</param>
            <param name="range">Range in a formula that contains the cell function.</param>
            <param name="cell">A reference to a cell with a LAMBDA. Is a single cell.</param>
            <param name="arguments">Arguments to pass to a LAMBDA.</param>
        </member>
        <member name="M:ClosedXML.Parser.IAstFactory`3.StructureReference(`2,ClosedXML.Parser.SymbolRange,ClosedXML.Parser.StructuredReferenceArea,System.String,System.String)">
            <summary>
            Create a node to represent a structure reference without a table to a range of columns.
            Such reference is only allowed in the table (e.g. total formulas).
            </summary>
            <param name="context">User supplied context for parsing a tree that is an argument of a parsing method.</param>
            <param name="range">Range in a formula that contains the structure reference.</param>
            <param name="area">A portion of a table that should be considered.</param>
            <param name="firstColumn">The first column of a range. Null, if whole table. If only one column, same as <paramref name="lastColumn"/>.</param>
            <param name="lastColumn">The last column of a range. Null, if whole table.If only one column, same as <paramref name="firstColumn"/>.</param>
        </member>
        <member name="M:ClosedXML.Parser.IAstFactory`3.StructureReference(`2,ClosedXML.Parser.SymbolRange,System.String,ClosedXML.Parser.StructuredReferenceArea,System.String,System.String)">
            <summary>
            Create a node to represent a structure reference to a table.
            </summary>
            <param name="context">User supplied context for parsing a tree that is an argument of a parsing method.</param>
            <param name="range">Range in a formula that contains the structure reference.</param>
            <param name="table">A name of a table.</param>
            <param name="area">A portion of a table that should be considered.</param>
            <param name="firstColumn">The first column of a range. Null, if whole table. If only one column, same as <paramref name="lastColumn"/>.</param>
            <param name="lastColumn">The last column of a range. Null, if whole table.If only one column, same as <paramref name="firstColumn"/>.</param>
        </member>
        <member name="M:ClosedXML.Parser.IAstFactory`3.ExternalStructureReference(`2,ClosedXML.Parser.SymbolRange,System.Int32,System.String,ClosedXML.Parser.StructuredReferenceArea,System.String,System.String)">
            <summary>
            Create a node to represent a structure reference to a table in some other workbook.
            </summary>
            <param name="context">User supplied context for parsing a tree that is an argument of a parsing method.</param>
            <param name="range">Range in a formula that contains the structure reference.</param>
            <param name="workbookIndex">Id of external workbook.</param>
            <param name="table">A name of a table.</param>
            <param name="area">A portion of a table that should be considered.</param>
            <param name="firstColumn">The first column of a range. Null, if whole table. If only one column, same as <paramref name="lastColumn"/>.</param>
            <param name="lastColumn">The last column of a range. Null, if whole table.If only one column, same as <paramref name="firstColumn"/>.</param>
        </member>
        <member name="M:ClosedXML.Parser.IAstFactory`3.Name(`2,ClosedXML.Parser.SymbolRange,System.String)">
            <summary>
            Create a node that should evaluate to a value of a name defined in a workbook.
            </summary>
            <remarks>
            Name can be any formula, though in most cases, it is a cell reference. Also note that
            names can be global (usable in a whole workbook) or local (only for one worksheet).
            </remarks>
            <param name="context">User supplied context for parsing a tree that is an argument of a parsing method.</param>
            <param name="range">Range in a formula that contains the name.</param>
            <param name="name">The defined name.</param>
        </member>
        <member name="M:ClosedXML.Parser.IAstFactory`3.SheetName(`2,ClosedXML.Parser.SymbolRange,System.String,System.String)">
            <summary>
            Create a node that should evaluate to a value of a name defined in a worksheet.
            </summary>
            <remarks>
            Name can be any formula, though in most cases, it is a cell reference. Also note that
            names can be global (usable in a whole workbook) or local (only for one worksheet).
            </remarks>
            <param name="context">User supplied context for parsing a tree that is an argument of a parsing method.</param>
            <param name="range">Range in a formula that contains the name.</param>
            <param name="sheet">Name of a sheet, unescaped.</param>
            <param name="name">The defined name.</param>
        </member>
        <member name="M:ClosedXML.Parser.IAstFactory`3.BangName(`2,ClosedXML.Parser.SymbolRange,System.String)">
            <summary>
            Create a node that processes a bang name in a formula (e.g <c>"Branch:" &amp; !Data</c>). Bang reference should
            be used only in defined names.
            </summary>
            <remarks>
            TODO: This method is not yet implemented, just added so I don't have to deal with API breakage.
            </remarks>
            <param name="context">User supplied context for parsing a tree that is an argument of a parsing method.</param>
            <param name="range">Range in a formula that contains the bang reference.</param>
            <param name="name">The defined name.</param>
        </member>
        <member name="M:ClosedXML.Parser.IAstFactory`3.ExternalName(`2,ClosedXML.Parser.SymbolRange,System.Int32,System.String)">
            <summary>
            Create a node that should evaluate to a value of a defined name in a different workbook.
            </summary>
            <param name="context">User supplied context for parsing a tree that is an argument of a parsing method.</param>
            <param name="range"></param>
            <param name="workbookIndex">Id of an external workbook. The actual path to the file is in workbook part, <c>externalReferences</c> tag.</param>
            <param name="name">Name from a workbook. It can be defined name or a name of a table.</param>
        </member>
        <member name="M:ClosedXML.Parser.IAstFactory`3.ExternalSheetName(`2,ClosedXML.Parser.SymbolRange,System.Int32,System.String,System.String)">
            <summary>
            Create a node that should evaluate to a value of a defined name in a worksheet of a different workbook.
            </summary>
            <remarks>
            Name can be any formula, though in most cases, it is a cell reference. Also note that
            names can be global (usable in a whole workbook) or local (only for one worksheet).
            </remarks>
            <param name="context">User supplied context for parsing a tree that is an argument of a parsing method.</param>
            <param name="range">Range in a formula that contains the name.</param>
            <param name="workbookIndex">Id of an external workbook. The actual path to the file is in workbook part, <c>externalReferences</c> tag.</param>
            <param name="sheet">Name of a sheet in the external workbook, unescaped.</param>
            <param name="name">The defined name.</param>
        </member>
        <member name="M:ClosedXML.Parser.IAstFactory`3.BinaryNode(`2,ClosedXML.Parser.SymbolRange,ClosedXML.Parser.BinaryOperation,`1,`1)">
            <summary>
            Create a node that performs a binary operation on values from another nodes.
            </summary>
            <param name="context">User supplied context for parsing a tree that is an argument of a parsing method.</param>
            <param name="range">Range in a formula that contains the binary operation.</param>
            <param name="operation">Binary operation.</param>
            <param name="leftNode">Node that should be evaluated for left argument of a binary operation.</param>
            <param name="rightNode">Node that should be evaluated for right argument of a binary operation.</param>
        </member>
        <member name="M:ClosedXML.Parser.IAstFactory`3.Unary(`2,ClosedXML.Parser.SymbolRange,ClosedXML.Parser.UnaryOperation,`1)">
            <summary>
            Create a node that performs an unary operation on a value from another node.
            </summary>
            <param name="context">User supplied context for parsing a tree that is an argument of a parsing method.</param>
            <param name="range"></param>
            <param name="operation">Unary operation.</param>
            <param name="node">Node that should be evaluated for a value.</param>
        </member>
        <member name="M:ClosedXML.Parser.IAstFactory`3.Nested(`2,ClosedXML.Parser.SymbolRange,`1)">
            <summary>
            This factory method is called for nested expression in braces (<c>(1+2)/4</c>). The problem isn't that
            it would be evaluated incorrectly, but it is to preserve braces during A1 to R1C1 transformation.
            </summary>
            <param name="context">User supplied context for parsing a tree that is an argument of a parsing method.</param>
            <param name="range"></param>
            <param name="node">The node representing expression in braces.</param>
            <remarks>Simplest implementation returns the same node and avoids extra nodes.</remarks>
        </member>
        <member name="T:ClosedXML.Parser.ModContext">
            <summary>
            A context for modifications of a formula through <see cref="T:ClosedXML.Parser.CopyVisitor"/>.
            </summary>
        </member>
        <member name="M:ClosedXML.Parser.ModContext.#ctor(System.String,System.Int32,System.Int32,System.Boolean)">
            <summary>
            Create a context for modifying formulas. 
            </summary>
        </member>
        <member name="M:ClosedXML.Parser.ModContext.#ctor(System.String,System.String,System.Int32,System.Int32,System.Boolean)">
            <summary>
            Create a context for modifying formulas. 
            </summary>
        </member>
        <member name="P:ClosedXML.Parser.ModContext.Formula">
            <summary>
            The original formula without any modifications.
            </summary>
        </member>
        <member name="P:ClosedXML.Parser.ModContext.Sheet">
            <summary>
            Name of the current sheet.
            </summary>
        </member>
        <member name="P:ClosedXML.Parser.ModContext.Row">
            <summary>
            Absolute row number in a sheet.
            </summary>
        </member>
        <member name="P:ClosedXML.Parser.ModContext.Col">
            <summary>
            Absolute column number in a sheet.
            </summary>
        </member>
        <member name="P:ClosedXML.Parser.ModContext.IsA1">
            <summary>
            Should references in formula be A1?
            </summary>
        </member>
        <member name="T:ClosedXML.Parser.NameUtils">
            <summary>
            A class for checking whether an identifier in a formula requires quotes or
            can can be used without quotes. This is an Excel custom behavior, unrelated
            to the unicode standard. The grammar defines a behavior, but that is not
            how Excel behaves. Microsoft likely made a selection based on each
            individual language without any connection to Unicode codepoint categories
            (e.g. it likely marked quote-like symbols from each language as requiring
            quotes). Data used in the methods were collected directly from Excel using
            AutoHotKey script.
            </summary>
        </member>
        <member name="F:ClosedXML.Parser.NameUtils.QuoteFirst">
            <summary>
            A bitmask indicating if the sheet name with first codepoint should be quoted.
            Generated by `Generate_sheet_quotation_data`. BitArray is fast and takes up only
            few KiB.
            </summary>
        </member>
        <member name="F:ClosedXML.Parser.NameUtils.QuoteNext">
            <summary>
            A bitmask indicating if the sheet name with next such codepoint should be quoted.
            Generated by `Generate_sheet_quotation_data`. BitArray is fast and takes up only
            few KiB.
            </summary>
        </member>
        <member name="F:ClosedXML.Parser.NameUtils.InvalidSheetChars">
            <summary>
            Character not allowed in a sheet name, even quoted one.
            </summary>
        </member>
        <member name="M:ClosedXML.Parser.NameUtils.ShouldQuote(System.ReadOnlySpan{System.Char})">
            <summary>
            Should the name be quoted?
            </summary>
            <remarks>
            Sheet names can't contain <c>*</c>,<c>/</c>,<c>:</c>,<c>?</c>,<c>[</c>,<c>\</c>,
            <c>]</c>, but method doesn't check for that. Also, it can't start with <c>'</c>,
            though it can be non-first character.
            </remarks>
            <param name="name">The name. Must be at least 1 char long.</param>
            <returns>True, if the sheet name should be quoted in formula.</returns>
            <exception cref="T:System.ArgumentException">If name is empty.</exception>
        </member>
        <member name="M:ClosedXML.Parser.NameUtils.IsSheetNameValid(System.ReadOnlySpan{System.Char})">
            <summary>
            Is the name of a sheet valid?
            </summary>
            <param name="sheetName">Name of the sheet.</param>
        </member>
        <member name="T:ClosedXML.Parser.ParsingException">
            <summary>
            Indicates an error during parsing. In most cases, unexpected token.
            </summary>
        </member>
        <member name="T:ClosedXML.Parser.ReferenceArea">
            <summary>
            Due to frequency of an area in formulas, the grammar has a token that represents
            an area in a sheet. This is the DTO from parser to engine. Two corners make an area
            for A1 notation, but not for R1C1 (has several edge cases).
            </summary>
        </member>
        <member name="P:ClosedXML.Parser.ReferenceArea.First">
            <summary>
            First reference. First in terms of position in formula, not position
            in sheet.
            </summary>
        </member>
        <member name="P:ClosedXML.Parser.ReferenceArea.Second">
            <summary>
            Second reference. Second in terms of position in formula, not position
            in sheet. If area was specified using only one cell, the value is
            same as <see cref="P:ClosedXML.Parser.ReferenceArea.First"/>.
            </summary>
        </member>
        <member name="P:ClosedXML.Parser.ReferenceArea.Style">
            <summary>
            Semantic style of reference.
            </summary>
        </member>
        <member name="P:ClosedXML.Parser.ReferenceArea.IsRowSpan">
            <summary>
            Is area a row span (e.g. <c>$5:7</c> in A1 or <c>R[7]</c>, <c>R7:R[9]</c>)?
            </summary>
        </member>
        <member name="P:ClosedXML.Parser.ReferenceArea.IsColSpan">
            <summary>
            Is area a col span (e.g. <c>$C:Z</c> in A1 or <c>C[7]</c>, <c>C7:C[9]</c>)?
            </summary>
        </member>
        <member name="M:ClosedXML.Parser.ReferenceArea.#ctor(ClosedXML.Parser.RowCol,ClosedXML.Parser.RowCol)">
            <summary>
            Create a reference symbol using the two <see cref="T:ClosedXML.Parser.RowCol"/> (e.g.
            <c>A1:B2</c>) or two columns (e.g. <c>A:D</c>) or two rows (e.g.
            <c>7:8</c>).
            </summary>
        </member>
        <member name="M:ClosedXML.Parser.ReferenceArea.#ctor(ClosedXML.Parser.RowCol)">
            <summary>
            Create an area for a single reference.
            </summary>
        </member>
        <member name="M:ClosedXML.Parser.ReferenceArea.#ctor(ClosedXML.Parser.ReferenceAxisType,System.Int32,ClosedXML.Parser.ReferenceAxisType,System.Int32,ClosedXML.Parser.ReferenceStyle)">
            <summary>
            Create a new area from a single <see cref="T:ClosedXML.Parser.RowCol"/>.
            </summary>
            <param name="rowType">Row axis type of a reference.</param>
            <param name="rowPosition">Row position.</param>
            <param name="columnType">Column axis type of a reference.</param>
            <param name="columnPosition">Column position.</param>
            <param name="style">Semantic of the reference.</param>
        </member>
        <member name="M:ClosedXML.Parser.ReferenceArea.#ctor(System.Int32,System.Int32,ClosedXML.Parser.ReferenceStyle)">
            <summary>
            Create a new area from a single row/column intersection.
            </summary>
            <param name="rowPosition"><see cref="F:ClosedXML.Parser.ReferenceAxisType.Relative"/> row.</param>
            <param name="columnPosition"><see cref="F:ClosedXML.Parser.ReferenceAxisType.Relative"/> column.</param>
            <param name="style">Semantic of the reference.</param>
        </member>
        <member name="M:ClosedXML.Parser.ReferenceArea.GetDisplayStringA1">
            <summary>
            Render area in A1 notation. The content must be a valid content
            from A1 token. If both references are same, only one is converted
            to display string.
            </summary>
        </member>
        <member name="M:ClosedXML.Parser.ReferenceArea.GetDisplayStringR1C1">
            <summary>
            Render area in R1C1 notation. The content must be a valid content
            from R1C1 token. If both references are same, only one is converted
            to display string.
            </summary>
        </member>
        <member name="M:ClosedXML.Parser.ReferenceArea.ToR1C1(System.Int32,System.Int32)">
            <summary>
            Convert A1 reference to R1C1.
            </summary>
            <remarks>Assumes reference is in A1.</remarks>
        </member>
        <member name="M:ClosedXML.Parser.ReferenceArea.ToA1OrError(System.Int32,System.Int32)">
            <summary>
            Convert R1C1 reference to A1.
            </summary>
            <remarks>Assumes reference is in R1C1.</remarks>
        </member>
        <member name="M:ClosedXML.Parser.ReferenceArea.AppendA1(System.Text.StringBuilder)">
            <summary>
            Get reference in A1 notation.
            </summary>
            <remarks>Assumes reference is in A1.</remarks>
        </member>
        <member name="M:ClosedXML.Parser.ReferenceArea.AppendR1C1(System.Text.StringBuilder)">
            <summary>
            Get reference in R1C1 notation.
            </summary>
            <remarks>Assumes reference is in R1C1.</remarks>
        </member>
        <member name="T:ClosedXML.Parser.ReferenceAxisType">
            <summary>
            The type of content stored in a row or column number of a reference.
            </summary>
        </member>
        <member name="F:ClosedXML.Parser.ReferenceAxisType.Relative">
            <summary>
            Axis is relative. E.g. <c>A5</c> for A1, <c>R[-3]</c> for R1C1.
            </summary>
            <remarks>Keep 0, so default <c>RowCol</c> is <em>A1</em>.</remarks>
        </member>
        <member name="F:ClosedXML.Parser.ReferenceAxisType.Absolute">
            <summary>
            Units are absolute. E.g. <c>$A$5</c> for A1, <c>R8C5</c> for R1C1.
            </summary>
        </member>
        <member name="F:ClosedXML.Parser.ReferenceAxisType.None">
            <summary>
            <para>
            The reference axis (row or column) is not specified for reference.
            Generally, it means whole axis is used. If the type is <see cref="F:ClosedXML.Parser.ReferenceAxisType.None"/>,
            the value is ignored, but should be 0.
            </para>
            <para>
            Examples:
            <list type="bullet">
              <item><c>A:B</c> in A1 doesn't specify row.</item>
              <item><c>R2</c> in R1C1 doesn't specify column.</item>
            </list>
            </para>
            </summary>
        </member>
        <member name="T:ClosedXML.Parser.ReferenceParser">
            <summary>
            A utility class that parses various types of references.
            </summary>
        </member>
        <member name="M:ClosedXML.Parser.ReferenceParser.TryParseA1(System.String,System.String@,ClosedXML.Parser.ReferenceArea@)">
            <summary>
            <para>
            Try to parse <paramref name="text"/> as a sheet reference (<c>Sheet!A5</c>) or a local
            reference (<c>A1</c>). If the <paramref name="text"/> is a local reference, the output
            value of the <paramref name="sheetName"/> is <c>null</c>.
            </para>
            <para>
            Unlike the <see cref="M:ClosedXML.Parser.ReferenceParser.TryParseA1(System.String,ClosedXML.Parser.ReferenceArea@)"/> or <see cref="M:ClosedXML.Parser.ReferenceParser.TryParseSheetA1(System.String,System.String@,ClosedXML.Parser.ReferenceArea@)"/>,
            this method can parse both sheet reference or local reference.
            </para>
            </summary>
            <param name="text">Text to parse.</param>
            <param name="sheetName">The unescaped name of a sheet for sheet reference, <c>null</c> for local reference.</param>
            <param name="area">The parsed reference area.</param>
            <returns><c>true</c> if parsing was a success, <c>false</c> otherwise.</returns>
        </member>
        <member name="M:ClosedXML.Parser.ReferenceParser.TryParseA1(System.String,ClosedXML.Parser.ReferenceArea@)">
            <summary>
            Parses area reference in A1 form. The possibilities are
            <list type="bullet">
              <item>Cell (e.g. <c>F8</c>).</item>
              <item>Area (e.g. <c>B2:$D7</c>).</item>
              <item>Colspan (e.g. <c>$D:$G</c>).</item>
              <item>Rowspan (e.g. <c>14:$15</c>).</item>
            </list>
            Doesn't allow any whitespaces or extra values inside.
            </summary>
            <param name="text">Text to parse.</param>
            <param name="area">Parsed area.</param>
            <returns><c>true</c> if parsing was a success, <c>false</c> otherwise.</returns>
        </member>
        <member name="M:ClosedXML.Parser.ReferenceParser.ParseA1(System.String)">
            <summary>
            Parses area reference in A1 form. The possibilities are
            <list type="bullet">
              <item>Cell (e.g. <c>F8</c>).</item>
              <item>Area (e.g. <c>B2:$D7</c>).</item>
              <item>Colspan (e.g. <c>$D:$G</c>).</item>
              <item>Rowspan (e.g. <c>14:$15</c>).</item>
            </list>
            Doesn't allow any whitespaces or extra values inside.
            </summary>
            <exception cref="T:ClosedXML.Parser.ParsingException">Invalid input.</exception>
        </member>
        <member name="M:ClosedXML.Parser.ReferenceParser.TryParseSheetA1(System.String,System.String@,ClosedXML.Parser.ReferenceArea@)">
            <summary>
            Try to parse a A1 reference that has a sheet (e.g. <c>'Data values'!A$1:F10</c>).
            If <paramref name="text"/> contains only reference without a sheet or anything
            else (e.g. <c>A1</c>), return <c>false</c>.
            </summary>
            <remarks>
            The method doesn't accept
            <list type="bullet">
              <item>Sheet names, e.g. <c>Sheet!name</c>.</item>
              <item>External sheet references, e.g. <c>[1]Sheet!A1</c>.</item>
              <item>Sheet errors, e.g. <c>Sheet5!$REF!</c>.</item>
            </list>
            </remarks>
            <param name="text">Text to parse.</param>
            <param name="sheetName">Name of the sheet, unescaped (e.g. the sheetName will contain <c>Jane's</c> for <c>'Jane''s'!A1</c>).</param>
            <param name="area">Parsed reference.</param>
            <returns><c>true</c> if parsing was a success, <c>false</c> otherwise.</returns>
        </member>
        <member name="M:ClosedXML.Parser.ReferenceParser.TryParseName(System.String,System.String@,System.String@)">
            <summary>
            <para>
            Try to parse <paramref name="text"/> as a name (e.g. <c>Name</c>) or a sheet name
            (<c>Sheet!Name</c>). If the <paramref name="text"/> is only a name, the output value of the
            <paramref name="sheetName"/> is <c>null</c>.
            </para>
            </summary>
            <param name="text">Text to parse.</param>
            <param name="sheetName">The unescaped name of a sheet for sheet name, <c>null</c> for a name.</param>
            <param name="name">The parsed name.</param>
            <returns><c>true</c> if parsing was a success, <c>false</c> otherwise.</returns>
        </member>
        <member name="M:ClosedXML.Parser.ReferenceParser.TryParseSheetName(System.String,System.String@,System.String@)">
            <summary>
            Try to parse a text as a sheet name (e.g. <c>Sheet!Name</c>). Doesn't accept pure name
            without sheet (e.g. <c>name</c>).
            </summary>
            <param name="text">Text to parse.</param>
            <param name="sheetName">Parsed sheet name, unescaped.</param>
            <param name="name">Parsed defined name.</param>
            <returns><c>true</c> if parsing was a success, <c>false</c> otherwise.</returns>
        </member>
        <member name="T:ClosedXML.Parser.ReferenceStyle">
            <summary>
            Style of referencing areas in a worksheet.
            </summary>
        </member>
        <member name="F:ClosedXML.Parser.ReferenceStyle.A1">
            <summary>
            The reference (<see cref="T:ClosedXML.Parser.ReferenceArea"/> or <see cref="T:ClosedXML.Parser.RowCol"/>)
            uses <em>A1</em> semantic. Even relative references start from
            <c>[1,1]</c>, but relative references move when cells move.
            </summary>
        </member>
        <member name="F:ClosedXML.Parser.ReferenceStyle.R1C1">
            <summary>
            The reference (<see cref="T:ClosedXML.Parser.ReferenceArea"/> or <see cref="T:ClosedXML.Parser.RowCol"/>)
            uses <em>R1C1</em> semantic. Relative references are relative to
            the cell that contains the reference, not <c>[1,1]</c>.
            </summary>
        </member>
        <member name="T:ClosedXML.Parser.RefModVisitor">
            <summary>
            It's designed to allow modifications of references, e.g. renaming, moving references
            and so on. Just inherit it and override one of <c>virtual Modify*</c> methods.
            </summary>
        </member>
        <member name="M:ClosedXML.Parser.RefModVisitor.LogicalValue(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,System.Boolean)">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.RefModVisitor.NumberValue(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,System.Double)">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.RefModVisitor.TextValue(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,System.String)">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.RefModVisitor.ErrorValue(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,System.ReadOnlySpan{System.Char})">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.RefModVisitor.ArrayNode(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,System.Int32,System.Int32,System.Collections.Generic.IReadOnlyList{ClosedXML.Parser.TransformedSymbol})">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.RefModVisitor.BlankNode(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange)">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.RefModVisitor.LogicalNode(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,System.Boolean)">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.RefModVisitor.ErrorNode(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,System.ReadOnlySpan{System.Char})">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.RefModVisitor.NumberNode(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,System.Double)">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.RefModVisitor.TextNode(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,System.String)">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.RefModVisitor.Reference(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,ClosedXML.Parser.ReferenceArea)">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.RefModVisitor.SheetReference(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,System.String,ClosedXML.Parser.ReferenceArea)">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.RefModVisitor.BangReference(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,ClosedXML.Parser.ReferenceArea)">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.RefModVisitor.Reference3D(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,System.String,System.String,ClosedXML.Parser.ReferenceArea)">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.RefModVisitor.ExternalSheetReference(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,System.Int32,System.String,ClosedXML.Parser.ReferenceArea)">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.RefModVisitor.ExternalReference3D(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,System.Int32,System.String,System.String,ClosedXML.Parser.ReferenceArea)">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.RefModVisitor.Function(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,System.ReadOnlySpan{System.Char},System.Collections.Generic.IReadOnlyList{ClosedXML.Parser.TransformedSymbol})">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.RefModVisitor.Function(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,System.String,System.ReadOnlySpan{System.Char},System.Collections.Generic.IReadOnlyList{ClosedXML.Parser.TransformedSymbol})">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.RefModVisitor.ExternalFunction(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,System.Int32,System.String,System.ReadOnlySpan{System.Char},System.Collections.Generic.IReadOnlyList{ClosedXML.Parser.TransformedSymbol})">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.RefModVisitor.ExternalFunction(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,System.Int32,System.ReadOnlySpan{System.Char},System.Collections.Generic.IReadOnlyList{ClosedXML.Parser.TransformedSymbol})">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.RefModVisitor.CellFunction(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,ClosedXML.Parser.RowCol,System.Collections.Generic.IReadOnlyList{ClosedXML.Parser.TransformedSymbol})">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.RefModVisitor.StructureReference(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,ClosedXML.Parser.StructuredReferenceArea,System.String,System.String)">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.RefModVisitor.StructureReference(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,System.String,ClosedXML.Parser.StructuredReferenceArea,System.String,System.String)">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.RefModVisitor.ExternalStructureReference(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,System.Int32,System.String,ClosedXML.Parser.StructuredReferenceArea,System.String,System.String)">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.RefModVisitor.Name(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,System.String)">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.RefModVisitor.SheetName(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,System.String,System.String)">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.RefModVisitor.BangName(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,System.String)">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.RefModVisitor.ExternalName(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,System.Int32,System.String)">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.RefModVisitor.ExternalSheetName(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,System.Int32,System.String,System.String)">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.RefModVisitor.BinaryNode(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,ClosedXML.Parser.BinaryOperation,ClosedXML.Parser.TransformedSymbol,ClosedXML.Parser.TransformedSymbol)">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.RefModVisitor.Unary(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,ClosedXML.Parser.UnaryOperation,ClosedXML.Parser.TransformedSymbol)">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.RefModVisitor.Nested(ClosedXML.Parser.ModContext,ClosedXML.Parser.SymbolRange,ClosedXML.Parser.TransformedSymbol)">
            <inheritdoc />
        </member>
        <member name="M:ClosedXML.Parser.RefModVisitor.ModifySheet(ClosedXML.Parser.ModContext,System.String)">
            <summary>
            An extension to modify sheet name, e.g. rename.
            </summary>
            <param name="ctx">The transformation context.</param>
            <param name="sheetName">Original sheet name.</param>
            <returns>New sheet name. If null, it indicates sheet has been deleted and should be replaced with <c>#REF!</c></returns>
        </member>
        <member name="M:ClosedXML.Parser.RefModVisitor.ModifyTable(ClosedXML.Parser.ModContext,System.String)">
            <summary>
            Modify reference to a cell.
            </summary>
            <param name="ctx">The origin of formula.</param>
            <param name="table">Original name of a table.</param>
            <returns>Modified name of a table or null if <c>#REF!</c>.</returns>
        </member>
        <member name="M:ClosedXML.Parser.RefModVisitor.ModifyFunction(ClosedXML.Parser.ModContext,System.ReadOnlySpan{System.Char})">
            <summary>
            An extension to modify name of a function. Doesn't modify the sheet/external functions.
            </summary>
            <param name="ctx">The transformation context.</param>
            <param name="functionName">Original name of function.</param>
            <returns>New name of a function.</returns>
        </member>
        <member name="M:ClosedXML.Parser.RefModVisitor.ModifyRef(ClosedXML.Parser.ModContext,ClosedXML.Parser.ReferenceArea)">
            <summary>
            Modify reference to a cell. This method is called for every place where is a ref and is
            mostly intended to change reference style.
            </summary>
            <param name="ctx">The origin of formula.</param>
            <param name="reference">Area reference.</param>
            <returns>Modified reference or null if <c>#REF!</c>.</returns>
        </member>
        <member name="M:ClosedXML.Parser.RefModVisitor.ModifyCellFunction(ClosedXML.Parser.ModContext,ClosedXML.Parser.RowCol)">
            <summary>
            Modify reference to a cell function.
            </summary>
            <param name="ctx">The transformation context.</param>
            <param name="cell">Original cell containing function.</param>
            <returns>Modified reference or null if <c>#REF!</c>.</returns>
        </member>
        <member name="M:ClosedXML.Parser.Rolex.RolexLexer.GetTokensA1(System.ReadOnlySpan{System.Char})">
            <summary>
            Get all tokens for a formula. Use A1 semantic. If there is an error, add token with an error symbol at the end or EOF token at the end.
            </summary>
            <param name="formula">Formula to parse.</param>
        </member>
        <member name="M:ClosedXML.Parser.Rolex.RolexLexer.GetTokensR1C1(System.ReadOnlySpan{System.Char})">
            <summary>
            Get all tokens for a formula. Use R1C1 semantic. If there is an error, add token with an error symbol at the end or EOF token at the end.
            </summary>
            <param name="formula">Formula to parse.</param>
        </member>
        <member name="T:ClosedXML.Parser.Rolex.TableTokenizer">
            <summary>
            A class required by a Rolex tool. Never used.
            </summary>
        </member>
        <member name="T:ClosedXML.Parser.RowCol">
            <summary>
            <para>
            One endpoint of a reference defined by row and column axis. It can be
            <list type="bullet">
              <item>
              A single cell that is an intersection of row and a column
              </item>
              <item>
              An entire row, e.g. <c><em>A</em>:B</c> or <c><em>R5</em>:R10</c>.
              </item>
              <item>
              An entire column, e.g. <c><em>7</em>:14</c> or <c><em>C7</em>:C10</c>.
              </item>
            </list>
            The content of values and thus their interpretation depends on the
            <see cref="T:ClosedXML.Parser.ReferenceArea"/> reference style, e.g. column 14 with
            <see cref="F:ClosedXML.Parser.ReferenceAxisType.Relative"/> can indicate <c>R[14]</c> or <c>X14</c> for A1
            style.
            </para>
            <para>
            Not all combinations are valid and the content of the reference corresponds
            to a valid token in expected reference style (e.g. in R1C1, <c>R</c> is
            a valid standalone reference, but there is no such possibility for A1).
            </para>
            </summary>
        </member>
        <member name="P:ClosedXML.Parser.RowCol.ColumnType">
            <summary>
            How to interpret the <see cref="P:ClosedXML.Parser.RowCol.ColumnValue"/> value.
            </summary>
        </member>
        <member name="P:ClosedXML.Parser.RowCol.ColumnValue">
            <summary>
            Position of a column.
            </summary>
        </member>
        <member name="P:ClosedXML.Parser.RowCol.RowType">
            <summary>
            How to interpret the <see cref="P:ClosedXML.Parser.RowCol.RowValue"/> value.
            </summary>
        </member>
        <member name="P:ClosedXML.Parser.RowCol.RowValue">
            <summary>
            Position of a row.
            </summary>
        </member>
        <member name="P:ClosedXML.Parser.RowCol.IsA1">
            <summary>
            Does <c>RowCol</c> use <em>A1</em> semantic?
            </summary>
        </member>
        <member name="P:ClosedXML.Parser.RowCol.IsR1C1">
            <summary>
            Does <c>RowCol</c> use <em>R1C1</em> semantic?
            </summary>
        </member>
        <member name="P:ClosedXML.Parser.RowCol.Style">
            <summary>
            Reference style of the <c>RowCol</c>.
            </summary>
        </member>
        <member name="P:ClosedXML.Parser.RowCol.IsRow">
            <summary>
            Is RowCol a part (start or end) of row span?
            </summary>
        </member>
        <member name="P:ClosedXML.Parser.RowCol.IsColumn">
            <summary>
            Is RowCol a part (start or end) of column span?
            </summary>
        </member>
        <member name="M:ClosedXML.Parser.RowCol.#ctor(ClosedXML.Parser.ReferenceAxisType,System.Int32,ClosedXML.Parser.ReferenceAxisType,System.Int32,ClosedXML.Parser.ReferenceStyle)">
            <summary>
            Create a new <see cref="T:ClosedXML.Parser.RowCol"/> with both row and columns specified.
            </summary>
            <param name="rowType">The type used to interpret the row position.</param>
            <param name="rowValue">The value for the row position.</param>
            <param name="columnType">The type used to interpret the column position.</param>
            <param name="columnValue">The value for the column position.</param>
            <param name="style">Semantic of the reference.</param>
        </member>
        <member name="M:ClosedXML.Parser.RowCol.#ctor(System.Boolean,System.Int32,System.Boolean,System.Int32,ClosedXML.Parser.ReferenceStyle)">
            <summary>
            Create a new <see cref="T:ClosedXML.Parser.RowCol"/> with both row and columns specified.
            </summary>
            <param name="rowAbs">Is the row reference absolute? If false, then relative.</param>
            <param name="rowValue">The value for the row position.</param>
            <param name="colAbs">Is the column reference absolute? If false, then relative.</param>
            <param name="columnValue">The value for the column position.</param>
            <param name="style">Semantic of the reference.</param>
        </member>
        <member name="M:ClosedXML.Parser.RowCol.#ctor(System.Int32,System.Int32,ClosedXML.Parser.ReferenceStyle)">
            <summary>
            Create a new <see cref="T:ClosedXML.Parser.RowCol"/> with both row and columns specified
            with relative values. Used mostly for A1 style.
            </summary>
            <param name="row">The relative position of the row.</param>
            <param name="column">The relative position of the column.</param>
            <param name="style">Semantic of the reference.</param>
        </member>
        <member name="M:ClosedXML.Parser.RowCol.op_Equality(ClosedXML.Parser.RowCol,ClosedXML.Parser.RowCol)">
            <summary>
            Compares two <see cref="T:ClosedXML.Parser.RowCol"/> objects by value. The result specifies whether
            all properties of the two <see cref="T:ClosedXML.Parser.RowCol"/> objects are equal.
            </summary>
        </member>
        <member name="M:ClosedXML.Parser.RowCol.op_Inequality(ClosedXML.Parser.RowCol,ClosedXML.Parser.RowCol)">
            <summary>
            Compares two <see cref="T:ClosedXML.Parser.RowCol"/> objects by value. The result specifies whether
            any property of the two <see cref="T:ClosedXML.Parser.RowCol"/> objects is not equal.
            </summary>
        </member>
        <member name="M:ClosedXML.Parser.RowCol.GetDisplayStringA1">
            <summary>
            Get a reference in <em>A1</em> notation.
            </summary>
            <exception cref="T:System.InvalidOperationException">When <c>RowCol</c> doesn't use <em>A1</em> semantic.</exception>
        </member>
        <member name="M:ClosedXML.Parser.RowCol.GetDisplayStringR1C1">
            <summary>
            Get a reference in <em>R1C1</em> notation.
            </summary>
            <exception cref="T:System.InvalidOperationException">When <c>RowCol</c> doesn't use <em>R1C1</em> semantic.</exception>
        </member>
        <member name="M:ClosedXML.Parser.RowCol.ToR1C1(System.Int32,System.Int32)">
            <summary>
            Convert <c>RowCol</c> to <em>R1C1</em>.
            </summary>
            <remarks>If <c>RowCol</c> already is in <em>R1C1</em>, return it directly.</remarks>
            <param name="anchorRow">A row coordinate that should be used as an anchor for relative R1C1 reference.</param>
            <param name="anchorCol">A column coordinate that should be used as an anchor for relative R1C1 reference.</param>
            <returns>RowCol with R1C1 semantic.</returns>
            <exception cref="T:System.ArgumentOutOfRangeException">Row or col is out of valid row or column number.</exception>
        </member>
        <member name="M:ClosedXML.Parser.RowCol.ToA1(System.Int32,System.Int32)">
            <summary>
            Convert <c>RowCol</c> to <em>A1</em>.
            </summary>
            <remarks>
            If <c>RowCol</c> already is in <em>A1</em>, return it directly. If converted <c>RowCol</c>
            is out of sheet bounds, loop it.
            </remarks>
            <param name="anchorRow">A row coordinate that should be used as an anchor for relative <em>R1C1</em> reference.</param>
            <param name="anchorCol">A column coordinate that should be used as an anchor for relative <em>R1C1</em> reference.</param>
            <returns>RowCol with R1C1 semantic.</returns>
            <exception cref="T:System.ArgumentOutOfRangeException">Row or col is out of valid row or column number.</exception>
        </member>
        <member name="M:ClosedXML.Parser.RowCol.AppendA1(System.Text.StringBuilder)">
            <inheritdoc cref="M:ClosedXML.Parser.RowCol.GetDisplayStringA1"/>
            <param name="sb">String buffer where to write the output.</param>
            <exception cref="T:System.InvalidOperationException">When <c>RowCol</c> is not in <em>A1</em> notation.</exception>
        </member>
        <member name="M:ClosedXML.Parser.RowCol.AppendR1C1(System.Text.StringBuilder)">
            <inheritdoc cref="M:ClosedXML.Parser.RowCol.GetDisplayStringR1C1"/>
            <param name="sb">String buffer where to write the output.</param>
            <exception cref="T:System.InvalidOperationException">When <c>RowCol</c> is not in <em>A1</em> notation.</exception>
        </member>
        <member name="M:ClosedXML.Parser.RowCol.Equals(System.Object)">
            <summary>
            Check whether the <paramref name="obj"/> is of type <see cref="T:ClosedXML.Parser.RowCol"/>
            and all values are same as this one.
            </summary>
        </member>
        <member name="M:ClosedXML.Parser.RowCol.Equals(ClosedXML.Parser.RowCol)">
            <summary>
            Check whether the all values of <paramref name="other"/> are same as
            this one.
            </summary>
        </member>
        <member name="M:ClosedXML.Parser.RowCol.GetHashCode">
            <summary>
            Returns a hash code for this <see cref="T:ClosedXML.Parser.RowCol"/>.
            </summary>
        </member>
        <member name="T:ClosedXML.Parser.StringBuilderExtensions">
            <summary>
            Extension methods for building formulas.
            </summary>
        </member>
        <member name="M:ClosedXML.Parser.StringBuilderExtensions.Append(System.Text.StringBuilder,System.ReadOnlySpan{System.Char})">
            <summary>
            Compatibility method for NETStandard 2.0, which doesn't have methods with <c>Span</c> arguments.
            </summary>
        </member>
        <member name="T:ClosedXML.Parser.StructuredReferenceArea">
            <summary>
            Structure reference is basically a set of cells in an area of an intersection between a range of columns
            in a table and a vertical range. This enum represents possible values. Thanks to the pattern of a structure
            reference token, the vertical range of a formula is always continuous (i.e. no <c>Headers</c> and <c>Totals</c>
            together).
            </summary>
            <remarks>
            The documentation calls it *Item specifier* and grammar *keywords*. Both rather unintuitive names, so *area*
            is used instead.
            </remarks>
        </member>
        <member name="F:ClosedXML.Parser.StructuredReferenceArea.None">
            <summary>
            Nothing was specified in the structure reference. Should have same impact as <see cref="F:ClosedXML.Parser.StructuredReferenceArea.Data"/>.
            </summary>
        </member>
        <member name="F:ClosedXML.Parser.StructuredReferenceArea.Data">
            <summary>
            <c>[#Data]</c> - only data cells of a table, without headers or totals.
            </summary>
        </member>
        <member name="F:ClosedXML.Parser.StructuredReferenceArea.Headers">
            <summary>
            <c>[#Headers]</c> - only header rows of a table, if it exists. If there isn't header row, <c>#REF!</c>.
            </summary>
        </member>
        <member name="F:ClosedXML.Parser.StructuredReferenceArea.Totals">
            <summary>
            <c>[#Totals]</c> - only totals rows of a table, if it exists. If there isn't totals row, <c>#REF!</c>.
            </summary>
        </member>
        <member name="F:ClosedXML.Parser.StructuredReferenceArea.All">
            <summary>
            <c>[#All]</c> - all cells of a table. 
            </summary>
        </member>
        <member name="F:ClosedXML.Parser.StructuredReferenceArea.ThisRow">
            <summary>
            <c>[#This Row]</c> - only the same data row as the referencing cell. <c>#VALUE!</c> if not on a data row
            (e.g. headers or totals) or out of a table.
            </summary>
        </member>
        <member name="T:ClosedXML.Parser.SymbolRange">
            <summary>
            A range of a symbol in formula text.
            </summary>
        </member>
        <member name="M:ClosedXML.Parser.SymbolRange.#ctor(System.Int32,System.Int32)">
            <summary>
            Create a substring of a symbol.
            </summary>
        </member>
        <member name="P:ClosedXML.Parser.SymbolRange.Start">
            <summary>
            Start index of symbol in formula text.
            </summary>
        </member>
        <member name="P:ClosedXML.Parser.SymbolRange.End">
            <summary>
            End index of symbol in formula text. Can be outside of text bounds, if symbol ends at the
            last char of formula.
            </summary>
        </member>
        <member name="P:ClosedXML.Parser.SymbolRange.Length">
            <summary>
            Length of a symbol.
            </summary>
        </member>
        <member name="M:ClosedXML.Parser.SymbolRange.ToString">
            <summary>
            Get range indexes.
            </summary>
        </member>
        <member name="T:ClosedXML.Parser.Token">
            <summary>
            A token for a formula input.
            </summary>
        </member>
        <member name="F:ClosedXML.Parser.Token.ErrorSymbolId">
            <summary>
            An error symbol id.
            </summary>
        </member>
        <member name="F:ClosedXML.Parser.Token.EofSymbolId">
            <summary>
            An symbol id for end of file. Mostly for compatibility with ANTLR.
            </summary>
        </member>
        <member name="F:ClosedXML.Parser.Token.SymbolId">
            <summary>
            A token ID or TokenType. Non-negative integer. The values are from Antlr grammar, starting with 1.
            See <c>FormulaLexer.tokens</c>. The value -1 indicates an error and unrecognized token and is always
            last token.
            </summary>
        </member>
        <member name="F:ClosedXML.Parser.Token.StartIndex">
            <summary>
            The starting index of a token, in code units (=chars).
            </summary>
        </member>
        <member name="F:ClosedXML.Parser.Token.Length">
            <summary>
            Length of a token in code units (=chars). For non-error tokens, must be at least 1. Ignore for error token.
            </summary>
        </member>
        <member name="M:ClosedXML.Parser.TokenParser.ParseSingleSheetPrefix(System.ReadOnlySpan{System.Char},System.Nullable{System.Int32}@,System.String@)">
            <summary>
            Parse <see cref="F:ClosedXML.Parser.Token.SINGLE_SHEET_PREFIX"/> token.
            </summary>
        </member>
        <member name="M:ClosedXML.Parser.TokenParser.ParseSheetRangePrefix(System.ReadOnlySpan{System.Char},System.Nullable{System.Int32}@,System.String@,System.String@)">
            <summary>
            Parse token <see cref="F:ClosedXML.Parser.Token.SHEET_RANGE_PREFIX"/>
            </summary>
        </member>
        <member name="M:ClosedXML.Parser.TokenParser.ParseR1C1Reference(System.ReadOnlySpan{System.Char})">
            <summary>
            Parse <c>A1_REFERENCE</c> token in R1C1 mode.
            </summary>
            <param name="token">The span of a token.</param>
        </member>
        <member name="M:ClosedXML.Parser.TokenParser.ReadR1C1Axis(System.ReadOnlySpan{System.Char},System.Int32@)">
            <summary>
            Read the axis value. Can work for row or column.
            </summary>
            <param name="token">The span of a token.</param>
            <param name="currentIdx">Index where is <c>C</c>/<c>R</c>.</param>
        </member>
        <member name="M:ClosedXML.Parser.TokenParser.ParseA1Reference(System.ReadOnlySpan{System.Char})">
            <summary>
            Extract info about cell reference from a <c>A1_REFERENCE</c> token.
            </summary>
        </member>
        <member name="M:ClosedXML.Parser.TokenParser.GetStructuredName(System.ReadOnlySpan{System.Char},System.Int32,System.String@)">
            <summary>
            Read a structured name until the end bracket or column
            </summary>
            <param name="input">Input span.</param>
            <param name="startIdx">First index of expected name. It will either contain a bracket or first letter of column name.</param>
            <param name="columnName">Parsed name.</param>
        </member>
        <member name="T:ClosedXML.Parser.TransformedSymbol">
            <summary>
            A symbol that represents a transformed symbol value. Should be used during AST transformation.
            </summary>
        </member>
        <member name="F:ClosedXML.Parser.TransformedSymbol._transformedText">
            <summary>
            The text that replaced symbol or null, if there was no change.
            </summary>
        </member>
        <member name="P:ClosedXML.Parser.TransformedSymbol.OriginalRange">
            <summary>
            Range of the symbol in original formula.
            </summary>
        </member>
        <member name="P:ClosedXML.Parser.TransformedSymbol.Length">
            <summary>
            Length of the transformed symbol.
            </summary>
        </member>
        <member name="M:ClosedXML.Parser.TransformedSymbol.ToText(System.String,ClosedXML.Parser.SymbolRange,System.String)">
            <summary>
            Create a symbol that is different from what was in the original formula.
            </summary>
            <param name="formula">Text of whole formula.</param>
            <param name="range">Range of the symbol in the formula.</param>
            <param name="transformedSymbol">The string of a transformed symbol.</param>
        </member>
        <member name="M:ClosedXML.Parser.TransformedSymbol.CopyOriginal(System.String,ClosedXML.Parser.SymbolRange)">
            <summary>
            Create a new symbol represented by a substring of an original formula. Generally used when
            there is no modification of the symbol (i.e. just pass it as it is).
            </summary>
            <param name="formula">Text of whole formula.</param>
            <param name="range">Range of the symbol in the formula.</param>
        </member>
        <member name="M:ClosedXML.Parser.TransformedSymbol.AsSpan">
            <summary>
            Get content of the symbol as a span. Doesn't allocate memory.
            </summary>
        </member>
        <member name="M:ClosedXML.Parser.TransformedSymbol.ToString(System.ReadOnlySpan{System.Char})">
            <summary>
            Get symbol as a text with extra text at the end.
            </summary>
            <param name="append">Text to append at the end of the symbol text.</param>
        </member>
        <member name="M:ClosedXML.Parser.TransformedSymbol.ToString">
            <summary>
            Get symbol text representation.
            </summary>
        </member>
        <member name="T:ClosedXML.Parser.UnaryOperation">
            <summary>
            Unary operations of a formula.
            </summary>
            <remarks>Range operations are always after number operations.</remarks>
        </member>
        <member name="F:ClosedXML.Parser.UnaryOperation.Plus">
            <summary>Prefix plus operation.</summary>
        </member>
        <member name="F:ClosedXML.Parser.UnaryOperation.Minus">
            <summary>Prefix minus operation.</summary>
        </member>
        <member name="F:ClosedXML.Parser.UnaryOperation.Percent">
            <summary>Suffix percent operation.</summary>
        </member>
        <member name="F:ClosedXML.Parser.UnaryOperation.ImplicitIntersection">
            <summary>Prefix range intersection operation.</summary>
        </member>
        <member name="F:ClosedXML.Parser.UnaryOperation.SpillRange">
            <summary>Suffix range spill operation.</summary>
        </member>
    </members>
</doc>